Product ID:MXB 7502 EXPOXY/GLASS PREPREG
MSDS Date:01/15/1989
FSC:8040
NIIN:00N026551
MSDS Number: BNKZQ

FIBERITE CORP

501 WEST THIRD STREET
WINONA, MN 55987-2854
US

Emergency Phone: 507-454-3611

Info Phone: 507-454-3611

Preparer: BRAD DIERINGER

Cage: GO063

FIBERITE CORP SUB OF BEATRICE FOODS

WINONA, MN 55987-2854 US

Telephone: 507-452-8082/507-452-8092

Cage: 07314

TOTAL VOLATILES TYPICALLY <2%.

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: SEE ING

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

FIBROUS GLASS; (GLASS FIBER)

CAS: 65997-17-3

Fraction By Weight: 55-75%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (DUST)

EPOXY RESINS

Fraction By Weight: 25-45%

AMINE CATALYST

Fraction By Weight: 2%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EPOXY RESINS CAUSE IRRITATION OF SKIN
& EYES, AND POSSIBLE DERMATITIS OR ALLERGY/SENSITIZATION. VAPORS
COMING OFF HEATED MATERIAL MAY CAUSE IRRITATION. LIVER & KIDNEYS
MAY BE TARGET ORGANS IF SOME EPO XIES ARE INGESTED. EXISTING
ALLERGIES MAY BE AGGRAVATED. EPOXIES ARE COMMONLY MUTAGENIC TO
BACTERIA. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: EXCESSIVE INHALATION OF ACETONE
VAPORS CAN CAUSE NASAL AND RESPIRATORY IRRITATION, HEADACHE, CNS
DEPRESSION AND NARCOSIS. FIBERS CAUSE MECHANICAL SKIN IRRITATION &
POSSIBLE RESPIRATORY IRRIT ATION.
Medical Cond Aggravated by Exposure:EXISTING ALLERGIES MAY BE
AGGRAVATED.

First Aid:EYES: FLUSH W/WATER FOR A MINIMUM OF 15 MINUTES, CONSULT MD.
SKIN: WASH W/SOAP & WATER. COOL WATER RINSING HELPS REMOVE FIBERS.
INHAL: MOVE TO FRESH AIR. INGEST: UNLIKELY TO BE A PROBLEM. CALL MD
IMME DIATELY .

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA/FULL PROT EQUIP .
EXOTHERM FIGHT PROC: DISSIPATE HEAT BY SPREADING MATL APART &
DOUSING W/H*2O. CNTN EMISSIONS USING LOC EXHST.
Unusual Fire/Explosion Hazard:EXOTHERMIC POLYMERIZATION MAY OCCUR.

Spill Release Procedures:PICK UP AND USE UNCONTAMINATED MATERIAL.
CONTAMINATED MATERIAL SHOULD BE PICKED UP AND DISPOSED OF PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AT 60-70F. IN ACCORDANCE W/GOOD
INDUSTRIAL PRACTICE, HANDLE WITH CARE AND AVOID UNNECESSARY
PERSONAL CONTACT.
Other Precautions:NUISANCE MATERIALS MAY BE RELEASED AS DUSTS WHEN
MACHINING CURED PRODUCTS.

Respiratory Protection:USUALLY NOT NEEDED. USE NIOSH/MSHA APPROVED
RESPIRATORS, IF NECESSARY, TO CONTROL NUISANCE DUST EXPOSURE WHEN
MACHINING.
Ventilation:GOOD GENERAL VENTILATION & LOCAL EXHAUST RECOMMENDED,
PARTICULARLY WHERE GRINDING OR HEATING OPERATIONS OCCUR.
Protective Gloves:BUTYL RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAN BODY-COVERING CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:1.5-2.2
Appearance and Odor:IMPREGNATED FIBERS/NO ODOR.
Percent Volatiles by Volume:<2(WT)

Stability Indicator/Materials to Avoid:YES
HF, STRONG OXIDIZERS, STRONG ACIDS, STRONG BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO*X, NO*X, AMINES, PHENOLS, BF*3.
Conditions to Avoid Polymerization:EXOTHERMIC POLYMERIZATION CAN OCCUR
W/RAPID OR EXCESSIVE HEAT. WHEN HEATED TO DECOMP, TOXIC EMISSIONS
MAY BE RELEASED.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE, & FEDERAL
REGULATIONS, WHICH MAY VARY BY LOCATION. QUESTIONS CONCERNING
DISPOSAL SHOULD BE DIRECTED TO FIBERITE'S SAFETY, HEALTH, &
ENVIRONMENTAL AFFAIRS DEPT FOR EVALUA TION ON A CASE BY CASE BASIS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.